Acuo 908


OverviewSpecificationsDOWNLOAD

ACUO 908 the new series for the On Air broadcast consoles !

A modern, compact design, in line with the latest trends in design, together with a careful and ergonomic study make it the new benchmark in the industry with an incomparable versatility, it can be used easily even in the case of outdoor operation

ACUO908 with eigth double switchable channels, designed specifically for broadcast applications.and it’s provided with AEV’s internal telephone hybrids or connected to any other external: this makes it a perfect and complete console for Radio Stations.

General overview:
– All Balanced inputs and outputs
– Eigth double channel inputs Mixer
– A/B input control
– 100 mm ALPS Sliders with Digital VCA control
– Four balanced mono Microphone input with phantom power with XLR connectors
– Eigth balanced stereo lines with RJ-45 connectors
– Two Digital AES/EBU input
– Digital Three band tone control all input channels
– TwoTelephone opto-coupled hybrid internally integrated with tone control
– Meeting function on telephone hybrid (PGM, UTL, AUX and CUE)
– CUE Bus
– Three independent Balanced Analog Stereo Outputs (PGM, UTL and AUX)
– Two independent Digital AES/EBU Outputs (PGM and UTL )
– Control Room and Studio functions with monitor mode selector
– Control Room out with mute logic
– Internal USB Audio Board for extra versatility connection
– Output opto-coupled ON AIR command
– Totally shielded bus
– Digital TFT display 4,3” for monitoring & setup functions , Digital stereo led meters: PGM& CUE
– Tabletop mount or rackmountable 19”

MIC INPUTS:
Input configuration: Electronically balanced
Input Impedance: 200 Ω
Sensitivity Level Range: Adjustable from –70 ÷-40 dBu (Trimmer adj.)
Input Level Range: ±12 dBu (Digital adj. step 0,5 dB)
Maximum Input Level: – 30 dBu
Phantom Supply: 42 Vdc selectable, with 3k3 c.c. protection
Fader 100 mm: VCA Digital controlled
Connector: XLR Female
LINE INPUTS:
Input configuration: Electronically balanced
Input Impedance: 10 KΩ (600 Ω wired selectable)
Input Level Range: ±12 dBu (Digital adj. step 0,5 dB)
Headroom: + 18 dBu
100 mm Fader control: VCA Digital controlled
Connector: RJ-45

DIGITAL INPUTS:
Input configuration: AES/EBU, IEC958,S/PDIF & EIAJ CP340/1201
Sample Rate: Automatic 32, 44.1, 48, 96 KHz converter
100 mm Fader control: VCA Digital controlled
Connector: RJ-45

TELEPHON HYBRID:
Input configuration: Opto-coupled
Input impedance: 600 Ω Bal
Line Compensation: Automatically (max 5 Km)
Tx Level: 0 or + 3 dBu selectable
Rx Level Range: ±12 dBu (Digital adj. step 0,5 dB)
Frequency response: 300 Hz ÷ 3400 Hz (-2 dB)
300 Hz ÷ 3400 Hz (-1.5 dB)
Distortion: < 1.5 %
Noise: -60 dB.
ANALOG OUTPUTS:
Output configuration: Electronically balanced
Output Impedance: 100 Ω
PGM/UTL Output Level Range: -2 ÷ +13 dBu
Connector: XLR male
AUX Output Level Range: 0 dBu fixed
Connector: RJ-45
C Room Mut.Output Lev.: – 2÷ +12 dBu
Connector: RJ-45
DIGITAL OUTPUTS:
Output configuration: AES EBU, IEC958,S/PDIF & EIAJ CP340/1201
Sample Rate: Automatic 32, 44.1, 48, 96 KHz converter
Connector: RJ-45

HEADPHONE:
Configuration Type: Stereo unbalanced (C.Room no Muted)
Output Impedance: 50 Ω
Connector: JACK 6,3 mm

LOGIC I/O:
Configuration: Optic solid state relay
Max Voltage: 50 Vdc/ac
Max Current: 100 mA
Connector: DSUB 15 pole female

USB PORT:
USB 2.0 interface
Dimensions: 440 x 360 x 40 mm ( L x P x H )